Month: March 2022

If you’ve got a Hoover vacuum cleaner, then you’ll know just how good it is at cleaning all around your home, and anywhere else that needs to be cleaned, like your car, or caravan. In order to keep it working as it should do, and to make it even more versatile and useful to you, you might want to consider keeping a range of spares, parts and accessories handy, so that you can tackle any cleaning job. EAGLE M5 M6 Module manufacturer

Here’s what you might need.

1. Hoover bags are essential if your vacuum cleaner uses them. It’s always a good idea to have some spare, in case there is an unexpected spillage that you need to clean up quickly. You’ll want to make sure that you get the right ones for your model of Hoover, otherwise they might not fit, and be an expensive waste of time and money.
2. Additional brushes can make cleaning furniture easier, and also means that you won’t have to use the same brushes to clean your sofa, as you use on your carpets. There are probably enough brushes for your vacuum cleaner to cover every cleaning eventuality.
3. By having a couple of spare filters, you’ll be able to make sure that your Hoover still works, no matter how much cleaning you need it to do.
4. Having a set of spare belts is also a good idea, as they’re sure to wear out at inopportune moments. Again, you’ll need to make sure that you get the right ones for your vacuum cleaner model, otherwise they might not fit.
5. If you damage your brush roll, then it will mean that your vacuum cleaner isn’t able to pick up as much dust and dirt as it used to. Make sure that you know which model you have, otherwise you might not get the right type, and it won’t fit. You’ll also need to know what colour you have too, otherwise the new part might not match.
6. If you need a new power switch, then you can probably fit it yourself, saving the time, hassle and expense of having to take it to be repaired. Make sure that you know which model you have, so that you get the right part. You don’t want to be without your Hoover for any longer than necessary.
7. There are many other internal parts that you can get for your Hoover vacuum cleaner, so if your vacuum has suddenly stopped working, you probably don’t have to throw it away and have the hassle of buying another one, you can just repair it.
8. If you want to make cleaning your home easier, then a longer extension wand could be just what you need. You won’t need to stand on chairs in order to clean those hard to reach places, such as the top of the curtains, or cobwebs from the ceiling.
9. Having the right length of extension hose will mean that you don’t have to move your Hoover around as much. This can be invaluable if you have a large home, or clean professionally.
10. If you damage one of your wheels, you can buy replacement ones, so that you don’t need to buy a new vacuum cleaner. Wheels are usually easy to fit, and so if you’ve been struggling due to a broken or missing wheel, why not replace it today?

Generally, aftermarket parts are made by the companies that purchase the patent (that has the original specifications for the original part) and produce it at a lower cost. Henceforth, an aftermarket part is meant to be manufactured to the accurate specifications that the original manufacturer has designed. Full electronic jacquard factory

There are good reasons why you would need to buy aftermarket automotive spare parts. The most obvious reasons are:-

• The OEM (Original Equipment Manufacturer) part is not available in the market due to a shortage.

• The original manufacturer is not probably making the auto parts for older or outdated vehicle models.

• Probably you don’t have the budget to buy the original spare part.

Whatever may be the reason, you will want to make sure that you are buying the right part for your vehicle, be it OEM or aftermarket part as you don’t want to compromise on the performance and efficiency of your vehicle nor do you want to damage your vehicle with unfit spare parts. Certainly, below are a few points that you need to take care off while deciding to purchase an aftermarket part for your vehicle.

• Make sure to buy from the company that solely transacts in making or supplying aftermarket parts. This establishes that they have an expertise dealing in aftermarket spare parts, and so you will receive the auto part that is of good quality and which provides good performance for your vehicle without causing any kind of defect to your vehicle.

• Several aftermarket high performance auto spares are quite expensive regardless of where you are looking for it. It makes sense to carry out this exercise of finding one good aftermarket part supplier for the first time, then after stick with them for all your future requirements.

• You want only quality auto parts that come at reasonable rates not necessarily cheap rates.

• Always buy aftermarket parts that come with proper guarantees so you can trust in the quality of the part. Also, carefully look through the guarantee section where proper steps are listed that needs to be followed in case you encounter some problem with the part.

• You need to be practical about what you want to spend and make sure that you receive your money’s worth. So don’t forget to pay close attention to the customer reviews and feedbacks of the aftermarket auto parts supplier from whom you have decided to purchase automotive spares for your vehicle.

In this modern world, silicone products become one of the most important things in industry. There are many companies need silicon rubbers. Those companies usually need silicon rubber in the production process to finish their product. Silicon rubber is usually used in keypad making and the like. The elastic rubber is very suitable to be used in mobile phones, computers, switches, and many other. Since keypad of mobile phones, have many different size and models according to the manufacturers and the series, the keypad manufacturing need to be customized to the needs. If you need silicon rubber manufacturing to supply your company need to find company that has ability to provide silicon rubber manufacturing to your company according to your specification. There aren’t many companies that can create silicone products. There aren’t many companies that have technology to create silicon rubber products with specified size and models. They are also not able to provide you with supreme design that is comfortable to use and with great look, feel, and performance. Root canal file limiting silica gel block manufacturer

There are only few companies in the USA that can give you the best Custom Silicone rubber manufacturing. Those companies have perfect interface controls’ leading-edge know-how, dedicated to rubber products design and techniques. Through these companies you can get the best silicon rubber products. As said before, silicon rubber is usually use in mobile phone industries, such as making keypads, independent Membrane Switch, and many more. In making the keypad, to result in the best design and durability, each keypad should be undergone several processes. From the design, it has to be done by the expert to make sure that the size, function, and color are match with the need. The design is then made into model and used as the blueprint for the manufacturing processes. After the Rubber Keypads are molded, it will undergo several coating processes to make sure that the product has the best quality and durability.

The Silicone keyboard usually has high flexibility and sensitivity. It is usually used in high-end mobile phones that still use Custom Keypad in the inputting system. If you are confused in choosing silicone rubber molding service, you need to get more information about it. There are articles and websites that provide information about silicone rubber industries. You can grab many articles from the internet before you decide to choose one of the silicone rubber molding industries to supply your company need. Moreover, when you have found the industry, you need to carefully designing the keypad, or any other silicon rubber products you need. This step is very important because minor mistake in calculating the size or model can cause fatal damaged to the silicon rubber products, and as the result, you need to re-design the rubber product to match your products. If you do so, then you are wasting your money and time. If you are not sure about the product, you can also ask sample of the products before you decide to order in large amount. By using this method, you can save your money if there is something wrong with the rubber product design.

A Brief on CSR’s Core Business:

CSR stands for Cambridge Silicon Radio and it started in 1999. The company started with only 36 employees and it started when it split from Cambridge Consultants. The founders of the company, who all formally worked at Cambridge Consultants, where Phil O Donovan, James Collier and Glenn Collinson. CSR is a designer, manufacturer of silicon products and software for the consumer electronics market and is headquarter in Cambridge, United Kingdom. In 2005 the company was listed on the London Stock Exchange in 2004. The business began with developing single chip Bluetooth devices. They released the world’s first single chip Bluetooth called the BlueCore1 in 2000. During the same year CSR appointed John Hodgson as CEO who helped lead the company to being as successful as it is. CSR went from having only 36 employees in 1999 to 129 employees in 2000. In 2004, CSR acquired Clarity Technologies Inc. for 17.1 million payable in cash. Clarity Technologies was a provider of software and services for the audio quality and performance of voice-based communications systems and products. The merging of both companies expanded CSR’s customer base by giving access to customers in the US. The acquisition of Clarity Technologies also gave CSR patented software that gave CSR a competitive advantage in the audio industry. Silicone daily necessities factory

About their Mergers and Acquisitions:

In 2009, CSR and SiRF merged together. SiRF was the biggest supplier of GPS chips. Two years before merging, CSR and SiRF were doing phenomenally well with having share values of about $28.65 for CSR and SiRF had shares of about $39.15. However, the year before the merging, 2008, CSR stock exchange dropped to $2.26. And SiRF shares dropped to $0.94 per share. The merging of both companies would create a global leader in connectivity and place platforms. A year later, 2010, CSR acquired APT. APT was a leader in offering full integrity of the original digital audio and is optimized for instant real-time audio streaming. When CSR acquired SiRF, CSR gained one of the industry’s best audio IP portfolios.

Once again, CSR merged with another company as part of their strategic business plan. CSR merged with Zoran in 2010. Zoran was a leader in providing digital cameras, printers, and the U.S. DTV space. The merging of the companies would expand CSR’s portfolio by offering products in the new markets such as automotive infotainment, gaming and other. After the merging of the two companies, CSR continued to be listed on the London Stock Exchange. A year later, CSR acquired another company, DDFA, Direct Digital Feedback Amplifier. With acquiring DDFA, CSR would be able to give a broad range of consumer products that include, but not limited to, speakers, for a variety of wireless and wired active speakers, speaker docks, sound bars and etc.

Markets Served:

CSR today mainly serves the following markets:

Audio
Automotive
Cameras
Computing
Document Imaging
Health & Fitness
Home entertainment
Mobile Devices
CSR in news Again!

The latest news for CSR was Samsung acquired CSR’s handset connectivity and location operations and the associated technology for $34.4 million in 2012. Today CSR focuses on higher margin business and growth areas such as voice & music, automotive infotainment, indoors location finding, imaging and Bluetooth smart.

You can browse on web for leading distributor of all types of CSR Electronic Parts from a comprehensive list of manufacturers. On this sites where you can get tier 1 pricing from manufacturers which pass selected savings to you.

Air Conditioning works by exchanging heat from inside a building to the outside air. To do this some very basic refrigeration principles need to take place. One of the most critical pieces that make this happen is the condenser coil. This is usually the aluminum coil the surrounds the air conditioning compressor. Compressor ac kits

What happens inside this outdoor unit is a very basic state change of the refrigerant inside the air conditioning unit. The refrigerant that changes from a liquid to a gas inside the indoor coil moves to the outside where the compressor compresses the gas under high pressure. When this happens the gas also becomes very hot. The hot gas then leaves the compressor to start traveling through the many feet of tubing in the condenser coil. As the gas cools it changes back to a liquid form going back indoors to start the cycle all over again.

Big problems start when the condenser coil becomes so blocked up with dirt that the hot gas in the condenser coil does not cool enough to change the hot gas back to a liquid form. If this happens the cooling process does not happen and then air conditioner runs but is not cooling. The compressor starts to get very hot and the ultimate result will be the death of a compressor. For these reasons the condenser coil must be kept clean and free of debris at all times when the air conditioner is running. Cleaning the coil is a fairly simple process, Here are a few guidelines to follow when doing this.

To clean the coil a few simple tools are needed. A garden hose with a nozzle, wrenches to remove the condenser fan, a garden sprayer for applying the cleaning solution. The first thing is to disconnect the power to the outdoor unit. There should be a disconnect switch of some type near the condenser. Then remove the fan from the condenser unit. Usually this will be the top of the unit. The fan can usually be laid aside carefully without disconnecting the wires to the motor. Carefully wet down the coil with the garden hose. If you have very high pressure water where you live be careful that the water pressure does not bend over the fins on the coil. These are very thin and fragile. If they get bent over the air will not be able to freely flow through them. Using the cleaning solution from the garden sprayer, coat he inside and the outside of the coil. Let the solution work on the dirt build up before washing it off. If you use a foaming type coil cleaner then let the foam cook the dirt out of the coil. Then use the garden hose to wash the dirt out of the coil. I often work from the inside spraying out through the coil. This is the reverse of the usual air flow and it washes the dirt out easier. Rinse the coil with water till it is clean with no more dirt or cleaner coming out. Replace the fan and start the unit back up.

The cleaning solution for the condenser coil can be any good household cleaner. Many automotive type radiator cleaners will work well. For very dirty condensers it would be good to buy a foaming coil cleaner made specifically for cleaning condenser coils. A local plumbing and heating supply house should stock coil cleaning solutions. Most of these solutions are very strong chemicals. Be sure to wear gloves and eye protection when working with them.

By keeping your air conditioning condenser coil clean, you will help to have your air conditioner running at the best efficiency possible. A clean condenser coil is one of the easiest ways to save electric while running your central air conditioning system. A clean coil will allow your compressor to run cooler and help it to last longer. Your condenser coil should be thoroughly cleaned at least once a year. If in you live in very dirty areas like along a dirt road you may need to clean the condenser coil more often. Also do not do things that would clog up the coil. Blowing grass clippings into the condenser coil is one common thing that happens. Keep shrubbery from growing into and around the condenser coil. This stops the air flow to the coil. Large flowers planted too close to the coil can do the same thing.

As you can see there are many things that can cause your air conditioner to work harder and cost you more money. By taking a the time to look over things and give it a cleaning you can save a lot of money.

A wide array of air conditioning compressors are used for industrial applications. For carrying out a process effectively, various process applications are required. Among the several process applications, one major section is transportation air conditioning. split ac compressor

Air conditioning has long been used in automobiles, especially in cars, SUVs and trucks. You simply press the button of the air conditioning system of your car and within a short time, the ambiance of the car changes. Cold air flows through the car’s vent, turning the car interior a pleasurable one. In fact, it is pretty simple, easy and a major convenience. But then, have you ever thought what are major components of an air conditioner and how do they work? Like most of us, you haven’t.

To start with, an air conditioning system whether placed at your home, in a factory or in your car works the same way. Interestingly, your refrigerator is a kind of air conditioner. The entire air conditioning system works on the theory of evaporation and condensation. This process is carried out in the air conditioning system through a number of components fixed by tubes and hoses. These basic components include the compressor, condenser, receiver-drier, thermostatic expansion valve, the evaporator and the refrigerant.

Among these components, the air conditioning compressors is termed as the power unit of the air conditioning system. As the A/C is turned on, the air conditioning compressor, under high pressure, puts in refrigerant vapor towards the condenser. The condenser then transforms the high-pressure refrigerant vapor into a liquid. The liquid refrigerant is then stored in the receiver-drier. The thermostatic expansion valve takes out the pressure from the liquid refrigerant and turns it to refrigerant vapor as it goes into the evaporator. Now the cool vapor is released from the evaporator, as the cold low-pressure refrigerant here absorbs the heat from the air.

But then, what if the air conditioning system of your car does not work properly? Well that can be a serious headache. Just for example, a fault in the air conditioning compressor can be really troublesome. A faulty air conditioning compressor turns noisy, loses cooling capacity, and gives a lot of trouble. Similarly, a fault in any part of the air conditioning of your car can stop the A/C from working in a proper way. In that case, it is only an expert who can help you. If you are in search of a specialist, you can always turn to National Compressors Exchange Inc, in case the problem lies in your air conditioning compressor.

At National Compressors Exchange Inc, you can get your air conditioning compressor rebuilt in the best way and made just as new. You will be surprised to get superb service at the most affordable prices you have ever dreamt of. It is indeed upsetting when you car A/C stops working, but if the problem is with the air conditioning compressor, you need not worry at all. The experts at National Compressor Exchange will fix up the compressors in no time.

While relocating to a new place, change of place and upheaval in the day to day life is not the only cause of worry. The safe shipment of your valuable belonging is as much a cause of botheration that it can give you sleepless nights. To prevent any damage, using the right packaging material is of utmost importance. Not only the quality, but also the shape, size and substance of the packing materials can spell the difference between safe shipping of items or just the opposite. Often we leave all the packaging and shipping task on the Movers and Packers Company we have hired and take no extra effort to check the quality of products they are using for packaging. However, the quality of these products itself can say a lot about the quality of the services of that company. Fish and seafood vacuum packaging

Following are a few listed packaging products and factors that you should look out for when selecting Packing Company for hiring:

Variety of Boxes:

If you want your valuable belongings to reach the destination intact and safe, then using the right Boxes is highly crucial. It is easier to pack basic things; however, the task of packing your valuable and delicate items like crystal ware, glass crockery, etc can be a tricky affair. It is highly important that the company comes equipped with crates and boxes of all sizes and substance. These crates should snugly fit the valuable items, leaving no space and scope for it to get damaged. These crates come in a wide range of size, shape and substance like cardboard, plastic, etc boxes. A company with limited selection of crates shows that either they are new in the business or do not believe in providing quality packaging services.

Selection of Wrapping Materials:

After crates, wrapping material plays an important role in ensuring safety of your valuables. A good company will come in with a good supply of different packaging materials like bubble wrap for instance. For valuable items, just the right size of crater is not important, but a protective layer of wrapping material is equally important, as it leaves no scope of movement inside the box.

Quality of Packaging Tape:

A good quality Tape ensures that the packaging of your items will not come off. This will ensure that your stuff is not damaged while being shipped.Check the quality of the tape being used by the company and demand for the best quality tape.

Handling:

Check how the packers of that company handle your valuable items. Are they rough with them or are they extremely cautious as to not to harm your items?

Check whether or not they are intelligently labeling the packages material with Cautionary tags like ‘This Side Up’, ‘Handle with Care’, ‘Top Load’, etc. These tags will help prevent damage while shipment

Check the above mentioned factors to choose the best packaging company for your valuables. Many people think these companies charge a lot; however, that is not the case. Choose a company that is affordable and gives best services.

What started as a debate on ecological modernization in the 1980s has been translated into a burgeoning trend. Thanks to the growing number of modern day businesses practicing sustainable solutions in the areas of procurement, manufacturing, distribution, storage and inventory, and moving. On the other end, sustainable packaging companies are meeting this increasing demand by offering new solutions by offering them eco friendly packaging: biodegradable paper, eco friendly plastic, recycled glass, recycled aluminum, and recycled corrugated. vacuum & gas flush

Biodegradable Paper Packaging

Today’s sustainable packaging companies provide businesses with more than just biodegradable paper products. They provide creative, customized packaging design solutions to companies, thus, helping reduce carbon footprint.

For instance, a start-up company based in Australia and with branches in UK and New Zealand, has been developing the ecopack packaging solution that “combines elements of pulp paper thermo forming with a specialized printing technology to create highly original and sustainable packaging.”

Biodegradable packaging is also called compostable packaging because it breaks down during the natural recycling process into compostable components, which means that the materials are recycled naturally, no additional energy is required to break the materials down compared to recyclable packaging materials that require external energy to break down properly.

Eco-friendly Plastic Packaging

Unquestionably, plastics are the world’s most versatile material, and they are, unquestionably, the world’s most polluting material. It is made with synthetic matters that don’t belong in our world and don’t mix well with nature; ironically, it is engineered to last.

But upon the issue of ozone layer depletion and global warming starts to stir the planet, manufacturing and packaging companies has taken part to conserving the environment.

There are three environment friendly plastics: 1. Bioplastics that are made from natural materials like corn starch; 2. Biodegradable plastics made from traditional petrochemicals, which are designed to break down more quickly; and the 3. Eco-Recycled plastics, which are made from recycled plastic materials rather than raw petrochemicals.

Recycled Glass Packaging

Glass is very popular in the sustainable packaging industry because it can be recycled indefinitely yet still maintain quality and purity. Just as in paper packaging, companies that specialize in recycled glass bottles aim to make them lighter in weight to help reduce carbon dioxide and greenhouse gas emissions.

There are several methods of producing glassware: automatic, semi- automatic and hand or mouth blown. The automatic method is used for bottles and jars because it is a fast, cost-effective method to produce large quantities of items, which are never touched until they are cooled and completed. The semi-automatic method uses both machine and manual work. The machinery forms the mold while the human hands assist in the more decorative designs of the piece. And the hand/mouth blown items are the most unique and pricey as glass artists spend time and effort fine tuning their glass work.

For instance, Couronne Company, a Texas-based (USA) wholesale glassware manufacturer and distributor specializing in the recycled glass industry has an extensive product range of glassware: cullets, glass bottles, glass jars, glass bowls, candle glass containers, glass vases…

According to Glass Packaging Institute, the trade association representing the North American glass container industry, the top glass users in the marketplace are – in random order: alcoholic and non-alcoholic beverages, liquor and wines, foods, cosmetics and fragrances, and pharmaceuticals.

Recycled Aluminum Packaging

Aluminum has long been a recycled medium dating back circa 1980s. It is light and strong, corrosion-resistant, durable, flexible to form, highly conductive, and is 100% recyclable – the only packaging material that can cover its cost of collection and processing into a newborn metal.

Aside from safeguarding valuable and perishable items, recycling it save natural resources. Moreover, based from European Aluminum Association, saving energy also means reducing carbon emissions: a tonne of aluminum recycled saves 95% of the greenhouse gases emitted during primary production.

Companies like an aluminum packaging recycling company in the UK, and Alcoa, the world’s leading producer of aluminum and with global locations across US, Canada, Europe, and Asia-Pacific, are just two of the companies that manufactures recycled aluminum packaging that also encourages consumers to recycle cans for a cash incentive.

Recycled Corrugated Packaging

These corrugated boxes have the image of being ‘environmentally correct’ because they can be recycled into new boxes and other products. That image is to a large extent justified, since the recycled fiber content of corrugated is generally the highest of any paper product. As of 1997 it was 66% and still climbing.

To produce recycled linerboard and recycled corrugating medium, many paperboard mills use both preconsumer and post-consumer old corrugated containers.

Preconsumer waste is corrugated materials such as off-rolls and trimmings from box plants. Post-consumer waste includes boxes that have been used for shipping and subsequently discarded. According to Discount Box Supply, one of the packaging companies based in Illinois, USA, standard corrugated boxes are fairly easy to recycle since they are printed lightly and require little or no deinking. The pulp made from old corrugated containers needs little cleaning and does not need to be bleached either.

There are no better ways to rejuvenate your senses except under the shower. By this, it is evident that the shower and other bathroom products play a vital role in our lives aside from its obvious functions. A lousy looking bathroom with old fashion products will only worsen your mood; it can never help you relax. That is why you need to take proper care of your bathroom by renovating it with new alluring bath products. China Freestanding Bathtub supplier

The interiors of a bathroom should consist of products like showers, taps, basins and other accessories. Many people spend lots of money trying to create a cozy and attractive home, which is a plus, but you should also give your bathroom the same attention you give your home. Many bathroom products are very much in demand to include bathroom mixer taps, pedestal basins, showers and many more. These products help to make your bathrooms “nerve relaxing”. With outstanding bathroom products like the head showers, rain showers and bathroom mixer taps, bathing now has a new face and style.

You can easily access good products from the market, or from wholesale companies or even from bathroom websites. You can access products easily with just a click on your mouse. You will love all the bathroom products that are available on our website, ranging from bathroom taps, basins, showers, baths and other modernized products like mixer taps. Therefore, you have no excuse for not giving your bath space the renovation it needs. For moms, you will no longer have to force your kids to the bathroom. They will personally enjoy the pleasure of just taking a bath in a cozy environment, which of course now makes your job easier.

With a newly renovated bathroom, the fear of entertaining your guest will be gone. Your visitors will have a lasting memory of the alluring new products they found in your bathroom, and will long for another visit. New bathroom products ease your job of cleaning. You will no longer have to work as much as you used to just to keep them clean. The same ways you would wish for new apparels and jewelries in your wardrobe, also desire for new products in your bathroom. There are many varieties of showers, basins, sinks, toilets, faucets and bathroom taps available to you today. So take the right steps and give your bathroom a makeover!

1. Bathroom product durability

Not all bathroom products are created equal in terms of quality and durability. Bathroom products are made from an extensive variety of materials and as such range widely in their durability. One of the factors to consider when examining the durability of products includes the length of the warranty and what is covered under it – the longer the warranty the more faith the bathroom manufacturer is likely to have in their own product. Another factor is how scratch resistant the material is – some manufacturers guarantee their product will not scratch and this is important for the aesthetic appeal of the bathroom and the longevity of the product. Waterproof or water safe material is another important factor to consider – there is no use selecting bathroom products which will warp, expand or disintegrate when they come into contact with water. Ask the sales assistant for information on the materials used and its durability before making your decision. Bifold Shower Enclosure factory

2. Functionality within the bathroom

It’s no good buying bathroom products if they don’t suit the space available, provide enough storage, are not suitable for all users and increase the amount of cleaning you will have to do. Depending on the space available you can select bathroom products which either maximise small bathroom spaces efficiently or enhance larger bathroom spaces. Make sure you have an accurate bathroom floor plan to work with to ensure your decisions are made on exact measurements and not approximations.

Bathroom storage is often overlooked but is a vital component of any bathroom. Think about what you will need to store i.e. towels, toiletries, hairdryers/straightners, cleaning products etc. Then look at what options you have to store them in i.e. towel racks, mirror cabinets, vanities, linen cupboards etc and work out which are your best options based on the space available. Another factor to consider with storage is draws versus doors on bathroom cabinets and furniture. Draws can provide easier access as you don’t have to reach past toiletries to get to the back of the shelf. If you do select doors on cabinets/furniture though make sure the position you put it in allows you to open the door properly.

Keep in mind it may not be just you who is using the bathroom, if you have small children or someone with limited physical ability the bathroom products you select may make it easier or harder for them to use the bathroom facilities.

The products you select can either increase or decrease the amount of cleaning you will have to do in order to keep the bathroom clean. For example if you install a back to wall toilet suite you don’t have to worry about all the dust and dirt that accumulates at the back with link toilet suites, better still install an in-wall bathroom cistern and you will only have to clean the toilet pan. There are numerous ways you can ensure your products provide the best functionality for your bathroom needs. It is important to remember that if your bathroom is not functional it will soon become a nuisance.

3. Water efficiency within the bathroom

Bathroom products such as toilets, bidets, tapware and showerheads are legally required to have a WELS rating. This allows you to compare the water efficiency of different products. By selecting the most water efficient products you can save money on water and electricity bills and help the environment. For example:

An old-style single-flush toilet could use up to 12 litres of water per flush. A standard dual flush toilet uses only three litres on a half-flush and six litres on a full flush, which equates to a 3 Star WELS rating.
A standard showerhead may use up to 25 litres of water per minute. A water-efficient showerhead might use as little as nine litres per minute, which equates to a 3 Star WELS rating.
The WELS rating system is similar to the energy rating labelling, with six stars. The more stars the better the bathroom product is, making it easier for you to select water efficient products.

4. Comfort within the bathroom

It’s all well and good to have great looking bathroom products, but what if they don’t feel good?

When selecting bathroom products try them out before you buy. Lye down in the bath or spa – can you stretch out, does it give you ample space on the sides? Sit on the toilet – is the seat, width and height comfortable? Bend over the vanity cabinet and basin – is the height suitable? Test the taps – are they easy to turn on and off? You may discover in the process that the products you were planning on buying aren’t as comfortable as they first appeared – thus saving you a lot of money and heartache in the future.

5. Ordering bathroom products

Ensure all of the bathroom products you’ve selected are currently available and in stock and, if possible, order them ahead of time, so they’re ready to go. Bathroom products can take anywhere between 4 to 14 weeks before they are ready, so it is important to order ahead so it does not delay your bathroom being completed.